A decisive factor for the selection of the right fuse box is the size and number of PD (division units / 1 PD = 17.5 millimetres). Depending on whether you want to use the surface-mounted distributors as small distributors or for larger sub-distribution. For this reason, you can choose the right model from various sizes. Depending on how many modules such as fuses and RCDs you want to install on the individual mounting rails (also called top-hat rails). 1 TE usually corresponds to one switch or one fuse.

Surface-mounted distributor in various sizes:

• 1 to 54 module places (TE) selectable
• Surface-mounted distributor 1-row, 2-row, 3-row and 4-row
• As standard, 12TE can be used per mounting rail, but more individual divisions are also possible.

In addition to the size and the modules that can be integrated per DIN rail, other factors are decisive. For example, you can choose from transparent or opaque doors in different colours and from materials such as polycarbonate (PC) and acrylonitrile butadiene styrene (ABS). Door hinges on both sides are also possible.

Surface-mounted distributors with transparent doors , for example, offer the advantage of allowing a quick and easy view of all the components installed inside. This is because many integrable fixtures have signal or warning lights, the status of which can thus be easily checked at a glance through the polycarbonate door without having to open the enclosure. It is particularly practical if it is also equipped with a safety lock. This is particularly advantageous for multimedia distributors, control cabinets or server cabinets. But it is also a quick and easy way to check the status of the fuses in the distribution box.

In addition, you can optionally choose from a wide range of accessories:

• Security locks
• Various screw connections (e.g. for pressure compensation, drainage, etc.)
• Double terminals and various insulated PE & N terminals
• Protective covers
• Busbars

Our distribution boxes are delivered ready for use. In addition to detailed assembly instructions, the appropriate number of terminals (insulated standard screw terminal) and corresponding mounting rails are installed depending on the number of modules. All fastening screws are of course also included in the scope of delivery.

The PE & N plug-in terminals can be adapted on request. As optional accessories we offer double-row insulated terminal strips or screwless insulated terminal strips to ensure ease of installation.

Scope of delivery at a glance:

• PE & N plug-in terminals ( quick-connect terminals)
• Mounting rails
• Cover
• Fastening screws
• Detailed assembly instructions
• Transparent polycarbonate door or opaque ABS door
• Sealing plug

The installation of small distribution boards and sub-distribution boards for power distribution is not something you want to spend a lot of time on in your day-to-day operations. Therefore, it is crucial to ensure flexibility, customizability and reliability while keeping assembly simple. For this purpose, the different series of our fuse boxes offer various advantages.

• The
  Multimedia distributor DISBOX-XA
  has all the necessary pre-stamping for flexible cable routing, so that all cables can be fed directly into the distributor from the plaster. This allows a very tidy overall appearance without lateral cable entries. In addition, router brackets and Schuko sockets can be integrated as an option for a tidy overall appearance.
• The
  DISBOX-F Damp room distributor surface-mounted
  have metric pre-stamping and, depending on the size, also pre-stamping for flange break-outs in the lower part of the housing. In this way, cable bushings or cable glands can be implemented in the surface-mounted distributor without any great effort, which decisively reduces the installation effort and also prevents damage to the housing wall, which could otherwise lead to chip formation. The existing metric pre-stamps are based on the housing type and size. In most cases, two different sizes can be broken out depending on requirements
• The
  DIXBOX-T surface-mounted distributor
  can optionally be individualized with a door hinge on the left or on the right. In addition, they have various pre-stampings on the back in order to be able to insert flush-mounted or flush-mounted cables into the housing at the top or bottom accordingly. In this way, a completely “clean” cable routing can be realised, in which, apart from the fuse box, no other surface-mounted cables are visible.
• For the safe and standard-compliant use of the distribution boxes, the possibility of unambiguous assignment of the installed components is of utmost importance. In our fuse and distribution boxes of all series, we provide clear labelling of all module mounting positions and also of the associated terminals. The cabling can thus be done much more easily and in a time-saving manner
• Mounting rails for smaller sizes – For the smaller sizes (2-5 modules), the mounting rails are already integrated in the housing. We have already reproduced the shape of a TS35 mounting rail in the mould of the injection moulding tool and integrated it in the housing base. This means that the individual components can be snapped on and wired very easily.
• Mounting rails for larger sizes – For the three larger enclosure sizes (12-54 modules), one or more mounting rails made of galvanized sheet steel are mounted and supplied accordingly. We only use the TS35 rail type

Installation options of various electrical modules:

• Lighting transformers
• Residual current circuit breaker (so-called FI circuit breaker)
• Bell transformer
• Circuit breaker
• Circuit breakers (the typical fuse)
• Fuses
• Switch
• v.m.