INSTALLATION HOUSING HANSE-MBR

Classic empty enclosures (industrial enclosures) often have the disadvantage that they do not provide pre-stamped cable entries. While classic junction boxes with pre-stamped holes for cable entries do not provide enough space for some connections of conductors and cables. Holes must be created manually with the appropriate tool in empty boxes without cable entries, and there is always a risk of negatively affecting the degree of protection. The waterproof junction boxes of the Hanse-MBR series from BOXEXPERT combine the advantages of small junction boxes and large industrial enclosures. On the one hand, the junction boxes have pre-stampings for the use of cable glands (diaphragm entry), which allows an easier installation without damaging the IP65 protection class by drilling holes. On the other hand, they are available in various dimensions and optionally with high covers, so that they provide the necessary space for any form of cable connection. The simple and at the same time safe cable entry is particularly important if the waterproof junction box is to be used in damp rooms or outdoor areas. Only if the cable entries seal completely after installation and are not damaged by drilling can the ingress of condensation, jet water or dust be completely prevented. Due to the membrane entry, the Hanse-MBR junction boxes are thus ideally suited for outdoor use, e.g. for gate control, for use in rooms with high humidity or for use in rooms such as laboratories and workshops that are regularly cleaned with jet water and splash water. The halogen-free and UV-resistant ABS plastic is also particularly robust (impact resistance IK06/07) and durable, so that neither extreme temperatures between -15°C to +70°C, nor frost, hail or sunlight have a negative impact on the cable protection provided by the junction boxes.

The lower part of the Hanse-MBR series housing has several diaphragm entries for cable entry. These are made of synthetic rubber and were bonded to the housing plastic by means of co-injection molding. This manufacturing process combines the two materials and ensures a degree of protection of up to IP 66 depending on the design. The diaphragm entries allow the uncomplicated insertion of the cables. The Hanse-MBR series offers different versions. The small installation housings have a lid with a snap lock. Here, the lid can be closed by applying slight pressure. This further simplifies the installation of the housing. The covers of the larger enclosures of the Hanse-MBR series are mounted using self-tapping screws. You can choose between a grey and a transparent lid.